How high to install curtain rods?
The general rule of thumb is about halfway between the ceiling and the floor where the shade ends. If you want to provide privacy from the room beyond the curtains you’ll want to make sure they’re at least eight feet off the ground.
One of the questions we get asked most often about curtain rods is about how high to install them and whether you should go by the actual window opening height or the finished room height. The answer is that it depends on the look you’re going for.
If you want the curtains to appear shorter than they are, then you should hang them lower than the window opening height, and if you want the opposite effect, then you should go with the window opening height.
You can also adjust the curtain
How to install curtain rods onto ceiling?
First, you need to find the right brackets and fixings to support the curtain rod. This will depend on the design of your existing ceiling. You can either cut the existing ceiling drywall away to access the wood framing and then install the brackets into the joists.
If you have a drop ceiling, you can also add the brackets directly to the drop ceiling. If you are wondering how to install curtain rods onto ceiling, you should first ensure that the ceiling joists are securely attached to the wall.
If you are unsure whether the joists are secure, you should enlist the help of a professional to inspect the area before proceeding. Another important thing to consider when installing curtain rods onto ceiling is the level of the ceiling. This is because the curtain rod can look uneven if the ceiling is uneven.
If you want to avoid unevenness, make sure to place a
How high to put curtain rods up?
We suggest having the uppermost rod at about 5 feet and the lowermost rod at about 4 feet off the floor. This gives you plenty of options for how you can dress your windows, but it also allows the curtain panels to reach every window. The right height for your curtain rods depends on the type of window you have and your window treatments.
You may want a higher rod if your window treatments are large and may need to block light from entering your room. Or you may want a lower rod if you want the drapes to gently cascade over the windowsills.
How to install curtain rods without brackets?
If you’re wondering how to install curtain rods without brackets, then this technique is for you. To do so, you will need to cut your own curtain rod brackets. You can either use a hand saw or a circular saw (depending on the size of your curtain rods).
After you cut the brackets, you will need to position the brackets on the wall where you want the curtain rods to hang. Then, you will need to attach the brackets to the wall studs via screws. If you want to hang your curtains without using brackets, you’ll need to learn how to do it correctly.
The key is to use a level when installing the rods, and measure the distance between the wall and the ceiling every few feet along the window. Take the measurements of each rod and mark them on the wall. To add an extra level of safety, use a level or laser tape to check for any unevenness in the wall or ceiling.
If needed, add shims or dry
How to install curtain rods with brackets?
In some windows, your curtain rods will have brackets that you will need to screw into the wall. This is especially the case if your windows have molding around them. Screwing the brackets into the wall will help keep the curtain rods secure. Screwing the brackets into drywall is not difficult, but if you are not very handy, you should enlist the help of a friend or family member. If you love the look of curtain rods with brackets, you can do it yourself! All you need is a small screwdriver and a pair of pliers. Measure the inside width of your curtain panels and use the pliers to hold the brackets in place while screwing them into the wall. Your brackets should be placed about every 4 to 6 inches. If you’re installing several curtains on your window, make sure the brackets are the same distance apart. If you need any help, watch a
