How to use Keurig descaling solution duo?

First, you need to make sure that the machine is completely empty. After you have cleaned and wiped all the parts, use a damp cloth and gently clean around the brew carousel and brew housing, making sure to clean the areas underneath the carousel. Afterward, use the descaling solution and rotate the carousel to scrub off any food particles.

First, locate the keurig coffee maker you would like to clean. If you have more than one machine, make sure to clean them one at a time. Then, turn off the coffee maker and wait for the brew cycle to complete.

After the brew cycle is finished, press the Cancel button. Unscrew the water reservoir and remove it. Then, place the descaling solution in the reservoir and ensure that the chemical is fully covered with water.

When the water level is visible, replace

How to use Keurig descaling solution duo plus plus?

It is important to use the duo in a safe manner and only as needed. For example, if you use an empty carafe and the water is still milky, then you probably only need to descale the machine. But if you have a full carafe and the water is clear, you may need to use the duo as well.

Pour the descaling solution duo into the brew tank, and brew away. The brew time will vary depending on the machine. When the brew is completed, turn off your machine and let it cool down. Once cooled, remove the brew carafe, then run a short wash cycle with hot water.

Afterward, use a dry towel to dry off the brew carafe. You should not use regular dish soap to clean the carafe as this will leave a film on the brew carafe.

How to use Keurig descaling solution duo plus?

As the name suggests, this is a two-part system, so make sure to follow the correct order, otherwise the two products won’t work properly. Firstly, use the descaling solution in the reservoir. Add the amount of water that is stated on the packaging to the reservoir. Once the water is added, press down the brew button.

After the brew cycle is complete, press down the pause/cancel button. Now, press down the small black button under the brew button. The Keurig descaling solution duo is used to clean the internal components of your Keurig machine as well as the carat stone.

After each brew session, you will need to use the descaling solution duo to clean the machine. It is important to use the solution every time you brew to avoid buildup and to maintain the performance of your Keurig machine.

How to use Keurig descaling solution duo for tea?

Brewing tea with Keurig is easy. But first you need to descale the machine. Always brew with water that is the temperature of your tap. Hot or cold water doesn’t affect the results. Use your Keurig machine to brew your favorite tea bag. Once the water is in the brew tank, simply add the brewable water and press the brew button.

Check the brew time on the screen and press the brew stop button. First, brew a cup of tea using your Keurig machine. Set it aside to cool. Then, slowly pour the brew over the descaled Keurig brew carafe and let it sit for about one to two minutes.

The brew will turn a milky color as it absorbs the chemicals. Let the tea brew for another minute and then pour it back into the cup. You can use the leftover brew to make another cup of tea or reheat the brew to drink as is.

How to use Keurig descaling solution duo to brew

Pour some of the water from your carafe or pot into the brew chamber (if applicable). Add the coffee grounds, brew your coffee and enjoy! After rinsing the machine’s brew tube and brew cup, add the water and brew your favorite coffee. When the machine beeps, press the brew start button. Leave the machine on for about 10 seconds and then remove the brew cup. The brew cup should be coated with a thin, white foam. This foam is a layer of calcium carbonate formed during the brewing process. The foam acts as an insulator to keep the coffee hot, as well as protect the machine’